1.2x1.2m Mini Tramp Box Size
|Box Number||Length (cm)||Width (cm)||Height (cm)||Weight (kg)|
|1 of 1||125||125||15||31.1|
1.2x1.2m Mini Trampoline - Overview
Designed by GeeTramp® with input from the Australian and New Zealand GTramp & Parkour community.
Finally, there is now a Mini Trampoline for domestic indoor and outdoor users.
Has a responsive bounce, sturdy frame, quality pads and is portable.
Adjustable front and rear legs provide multiple options for mat angle and frame heights.
Comes 95% pre-assembled, simply unfold legs, set lock pins and it's ready to use.
Uses the same materials as our full-size outdoor trampolines with inbuilt UV protection.
This Mini Trampoline weighs just over 30kg and the frame size is 1.25m x 1.25m so will fit in a reasonable range of vehicles for ease of transportation.
Simple to flat pack, comes with a carry bag for transportation and storage.
This is not a beginner level Mini Trampoline (not for unsupervised children).
This is not an Olympic grade Mini Trampoline for elite gymnastics.
This is a mid-range performance Mini Trampoline for indoors and outdoors use by trained users with safety supervision.
What a great way to be active, keep fit and practice your Gtramp, Parkour and Gymnastic routines.
Mat - UV Resistant USA Material
Made from USA Tencate™ Permatron® material which is the most durable & UV resistant trampoline mat available, all backed by our three-year warranty.
The trampoline pads are what keeps your kids safe from the nearby framework and springs. These pads have been designed and tested over many years and have proven to be one the best around. Made from extra durable 500D, .55mm PVC on the top and bottom (which is what you see on the outside).
Our pads have had a lot of thought, from how safe they are, to water drainage to enable longer life. Our pads secure with many replaceable elastic bungee cords that thread through the pre-installed brass eyelets and wrap around the frame and spring attachment triangles.
Thick, Impact Absorbing Foam
Our pads feature a unique two-step foam that puts protection where you need it the most (over the frame), also making it very water resistant - the water just runs off the pads and prevents excessive pooling. Our pads are 30mm thick at the frame edge.
Thick & Durable
Pads need to be able to handle being accidentally jumped on, and this is why we use one of the highest grades of PVC material. You'll find other companies will use a low-grade PVC material on the top and use an even weaker PE material on the bottom to save on cost; our pads use the same high-quality 500D .55mm PVC on the top and bottom.
Extra Strong Stitching
Many trampoline pads sections aren't sewn together with stitching on the top (only the bottom). Our pads are top stitched to increase strength and to ensure they last for as long as possible.
No Spring Access!
Normally, a trampoline's padding is the only thing keeping your kids safe from the springs. Unfortunately, sometimes they can still get their hands on them - not anymore! Our padding is smartly designed and has an extra netting material sewn directly to the pads and then attaches to the spring attachment triangles.
|Maximum Weight Capacity||90kg|
|Frame Size (Imperial)||4x4ft|
|Frame Size (Metric)||1200mm x 1200mm|
|Frame Height, Ground to Mat Height - "F"||290mm to 535mm (variable leg adjustment)|
|Frame Tube Size||38mm Diameter x 1.5mm Thick|
|Leg Tube Size||38mm Diameter x 1.5mm Thick|
|Steel Tube Finish||Hot Dip Heavy Duty Galvanised (inside & out) with Mat Black Powdercoating|
|Mat Size||Mat Size|
|Mat Material||USA Tencate™ Permatron® Woven Polypropylene|
|Spring Quantity - Per Side||6 per side plus 4 in each corner|
|Spring Quantity - Total||40|
|Spring Padding Cover||Forest green, PVC 500D x .55mm thick for upper & lower cover|
|Spring Padding Insert||EPE foam, 300mm wide, 30mm thick over the frame, 15mm thick at the mat edge|